Protection of the shot blasting chamber

 The armor, or shell of the shot blatster chamber, is designed to prevent the wear of the body of the shot blasting. Many European and Chinese manufacturers manufacture armor for shot blasters from a large number of segments of different sizes, which significantly complicates the repair of equipment. The service of the chief mechanic has to have a huge number of types of armor plates in stock. The second option is that the protection is made in several large segments and welded to the body. With point wear, you have to change the entire sheet.
.

To avoid unnecessary costs, our specialists have developed a universal solution. We manufacture 2 types of armor to protect the chamber, 15 mm thick, with overlapping sides to avoid cracks. The fastening method is simple: a stud is welded to the body, the protection is put on the stud and screwed with a special wear-resistant nut. If necessary, the protection can be adjusted to the size of the chamber using the angle grinder. In case of partial wear of one segment of the protection of the shot blaster, it can be swapped with a less worn one and continue work. This solution is applicable for any type of shot blasting equipment.

We accept orders for the manufacture of chamber protections for shot blasters from any manufacturers: European, Chinese, Russian, etc. We can also make parts according to the customer's drawings.