Having our own foundry in addition to the main production allows us to produce:

This type of shot blasters is widely demanded in the market of pipe manufacturers, since high-quality surface preparation and dedusting of pipes before causing anti-corrosion openings provide a significant increase in the useful life of these products. It is used to clean pipes of a round profile and other cylindrical products from rust and scale.

 Intended use:

1) Removal of rust and scale
2) Removal of old paint
3) Application to the surface of a stable uniform roughness Rz from 60 to 120 microns

Working speeds from 3 m/min to 9 m/min are achieved by using high performance SATURN turbines with engine power from 11 to 15 kW..

Our Features:

• he design of the aspiration system allows to significantly reduce the dustiness on the pipe surface to the required degree of dustiness 3 according to ISO 8502-3.
• The ergonomic arrangement of the turbines on the body of the shot blaster allows you to reduce energy consumption by 10 - 15% by reducing the power of the turbine motors.
• The service life of filter cartridges increased by 20% is achieved by preventing large abrasive particles from entering the filter unit.
  

Model range:

WB 325 T - the diameter of the processed pipes is from 57 to 325, 1 Saturn turbine.
WB 530 T - the diameter of the processed pipes is from 57 to 530, 2 Saturn turbines.
WB 820 T - the diameter of the processed pipes is from 219 to 820, 2 Jupiter turbines.

The technical service of WILL BLAST TECHNOLOGY can develop an individual model according to the Customer's requirements